Korich
plastic metal separator used for detecting and separating metal contaminations
mixed within plastic raw material, including magnetic metal or nonmagnetic
metal ( such as copper、aluminum and stainless steel etc.). In the
process of waste material broken and recovery, some metal contaminations will
mixed within production material inevitably that makes production accident when
this kind of material (including metal contaminations) into production line,
which adds the time of shutdown and maintenance, adds cost investment and
influence the product efficiency.
The advantages of
combination
Metal
separator can be used independently and just placed near crusher, crushed raw
material direct into metal separator by air-blast and eliminate metal
impurities from raw material, which will prevent metal impurity into equipment
just like injection molding machine and protect its screw、hot runner of mold
etc.
Metal separator spec. and technical parameters
Model
KRH-25
KRH-35
KRH-50
KRH-70
KRH-100
Diameter of detecting passage
Φ25mm
Φ35mm
Φ50mm
Φ70mm
Φ100mm
Minimum detectable diameter
Φ0.2-0.3mm
Φ0.3-0.4mm
Φ0.5-0.6mm
Φ0.8-1.0mm
Φ1.0-1.2mm
Maximum throughput
250KG/HR
300-400 KG/HR
700-800 KG/HR
1000-1500 KG/HR
2000-2500 KG/HR
Working voltage
220V/50～60Hz
220V/50～60Hz
220V/50～60Hz
220V/50～60Hz
220V/50～60Hz
Environment temperature
-10～+80℃
-10～+80℃
-10～+80℃
-10～+80℃
-10～+80℃
Disposal time is adjustable
0.3-5seconds
0.3-5秒seconds
0.3-5seconds
0.3-5seconds
0.3-5seconds
Compressed air
3～5Bar
3～5Bar
3～5Bar
3～5Bar
3～5Bar
L*W*H dimensions (mm)
318X230X326(mm)
318X230X326(mm)
318X230X326(mm)
378X270X350(mm)
390X280X385(mm)
Special sizes and requirements can be customized according to customer requirements.
