Location：Home >>

Plastic metal separator

Product name

Metal separator

Product profile

Korich plastic metal separator used for detecting and separating metal contaminations mixed within plastic raw material, including magnetic metal or nonmagnetic metal ( such as copper

、

aluminum and stainless steel etc.). In the process of waste material broken and recovery, some metal contaminations will mixed within production material inevitably that makes production accident when this kind of material (including metal contaminations) into production line, which adds the time of shutdown and maintenance, adds cost investment and influence the product efficiency.

The harmfulness of metallic impurity in equipment and production

	Always blocks nozzle of injection molding machine Damage screw Scratch cylinder body of injection molding machine Scratch finished product and leave trace on it Block injection port of mold Increase the pressure of hot runner and retard flow Scratch mirror plane of mold Impact precision mold Mixed within finished product and cause disqualification
The advantages of using metal separator	Protect production equipment Enhance productivity Enhance raw material use efficiency Elevate product quality Decrease the cost of equipment maintenance and followed production cost

Metal separator spec. and technical parameters

Model	KRH-25	KRH-35	KRH-50	KRH-70	KRH-100
Diameter of detecting passage	Φ25mm	Φ35mm	Φ50mm	Φ70mm	Φ100mm
Minimum detectable diameter	Φ0.2mm	Φ0.3mm	Φ0.5mm	Φ0.7mm	Φ1.0mm
Maximum throughput	250KG/HR	300-400 KG/HR	700-800 KG/HR	1000-1500 KG/HR	2000-2500 KG/HR
Working voltage	220V/50～60Hz	220V/50～60Hz	220V/50～60Hz	220V/50～60Hz	220V/50～60Hz
Environment temperature	-10～+80℃	-10～+80℃	-10～+80℃	-10～+80℃	-10～+80℃
Disposal time is adjustable	0.3-5seconds	0.3-5seconds	0.3-5seconds	0.3-5seconds	0.3-5seconds
Compressed air	3～5Bar	3～5Bar	3～5Bar	3～5Bar	3～5Bar
LWH dimensions (mm)	318X230X326(mm)	318X230X326(mm)	318X230X326(mm)	378X270X350(mm)	390X280X385(mm)

Special sizes and requirements can be customized according to customer requirements